![]() I grabbed some PVC pipe and cut two lengths at the miter saw. My little dogs eat 1 cup of food each a day so I started off building a mechanism that would dispense that amount. ![]() Once the joint compound is fully dry, I again sanded but this time with 120 grit, just until the compound filled in areas were leveled out.Īlright, that is the body done for the moment so lets start work on the mechanism. My method for filling these in for a seamless paint surface is to apply some joint compound to it. If you use plywood, unless you use a really high end grade there are always a few voids in the plys. Once the glue was dry, I gave both sides a good sanding with 80 grit to smooth out any slight unevenness between layers. If you would rather stain it, then you can do the same process from any solid wood as well.Īs I was laminating the sides, I did my best to keep things aligned so it would minimize sanding and shaping in the next step. I’m using Titebonds fast drying Quick and Thick here and also using a brad nailer to hold the parts to the previous one.įor the body I’m using a construction grade plywood because I’ll be painting it later on. Once I had the needed amount of parts cut and shaped, I started gluing them together. What I’m doing is building up the sides to the height needed by stacking identical parts on top of each other. Instead of messing with bending wood, I cut out a template on my CNC then traced it onto a sheet of plywood wood, then cut it out. I kept the overall shape of it the same as before, because honestly the shape is the best for the application I think, but this time I wanted to soften the shape some by adding in some curves. RIPIT DISPENSER CODETotal Boat Epoxy: Use code APRILW for 20% off! Let me start at the beginning and show you how I did it. Well, in this project, I’ll show you how I remade the dispenser with a mechanism inside that releases a set amount of food per pull of a lever. ![]() It worked great but there was no way to regulate how much food was being dispensed. It was a simple shape and at the bottom I placed a blast gate to release food into a pouring container. ![]() And one of those things was a dog food dispenser. RIPIT DISPENSER HOW TOIt was five years ago that I started making videos and showing people how I was figuring out how to build things I needed. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |